Home Services Solutions Commercial Model Contact Us Talk to Us
Hotel Energy Optimization & BMS Modernization · US-Wide

Any Building.
Any System.

Independent BMS and energy management engineers for large hotels across the US. We cut energy costs by 10% or more, or fix the BMS that's holding your building back — working with the equipment you already have.

10+
Years Engineering
3
Continents
Any
Protocol or Manufacturer
$0
Upfront — Performance Model Available
What We Do

Two Services. One Platform.

Vantage powers everything we do — deployed as a fresh BMS installation, or as an EMS intelligence layer on top of what you already have.

01

BMS Installation

When a building management system is end-of-life, unsupported, or too fragmented to manage — we design and install a modern, open-protocol system from the ground up, powered by Vantage. Full commissioning, staff handover, and ongoing managed service included.

Open Protocol Any Manufacturer Vantage Powered

Talk to us about your BMS →

02

EMS Overlay

Your existing BMS stays exactly where it is. We connect the Vantage EMS layer on top — optimizing chiller scheduling, load shaping, and demand management in real time, with minimal disruption. Savings of at least 10% are verified on your building before you pay anything.

No Rip-and-Replace 10% Guaranteed Minimal Disruption

Talk to us about energy savings →

Vendor Independent

We Work on Anything.
We Sell Nothing.

The major BMS manufacturers want you to buy their ecosystem. We have no such agenda. We connect to any protocol, any manufacturer, any vintage of equipment — because that's what good engineering requires.

Where standard hardware didn't exist, we've developed our own. Our proprietary sensor and communications modules bridge the gap between legacy infrastructure and modern intelligence.

BACnet
IP & MS/TP
RS-485
Modbus RTU
Zigbee
Mesh Wireless
TCP/IP
Ethernet & WiFi
Proprietary
Custom Modules
Cloud / Edge
Hybrid Architecture

Why Independence Matters

No vendor lock-in. We specify and install the best solution for your building, not the most profitable one for a manufacturer.

Works on existing equipment. Your chillers, AHUs, and legacy panels stay in place. We connect to them, not around them.

Battle-tested across continents. Over a decade of deployments in hotels, commercial buildings, and industrial facilities across three continents.

Engineer-built technology. Our platform was designed by an engineer who spent years inside the big OEMs — and built it around what those systems leave out.

Proprietary hardware where needed. When off-the-shelf didn't exist, we built it ourselves. RS-485 modules, Zigbee mesh sensors, thermal metering — developed in-house.

Commercial Model

We Structure the Deal
Around Your Situation.

Not every client needs the same commercial arrangement. We offer straightforward purchase and SaaS options — and for clients where energy savings are on the table, a performance model that costs nothing upfront.

📋

Direct Purchase + SaaS

You pay for the installation and a monthly software and SLA fee for ongoing management, monitoring, and Vantage platform access.

⚡

Performance Model — Zero Upfront

Where significant energy savings are identified, we fund and install the full EMS at our expense. You pay only from the savings we generate, and invoicing starts only after savings of at least 10% are verified on your building.

📊

Vantage Platform Only

Already have a BMS but want better visibility and control? We can connect Vantage to your existing infrastructure for a monthly platform fee.

$0
Upfront — Performance Model

For qualifying buildings, subject to site qualification and rollout availability, we fund and install the complete EMS at our expense. Our fee comes from a share of the energy savings we deliver — which means we are as motivated as you are to perform.

10% minimum savings, verified before you pay
Savings measured in dollars, not kWh estimates
On/off energy test after commissioning — you sign off on the result
ESG reporting included

Your Complete Building Intelligence Platform.

Vantage is the software platform that powers our BMS and EMS services. Every engagement runs on it — from the control layer managing your building equipment, to the dashboard your engineering and management teams access from any browser, anywhere in the world.

→

Real-Time Equipment Visibility

Monitor all connected building systems live — from any device, any location, at any time.

→

Remote On/Off Control

Bi-directional control of connected equipment without being on-site.

→

Automated Alarms & Alerts

Critical equipment events trigger instant notifications to the right people.

→

Temperature Trend Analysis

Actual vs. target performance tracked continuously across all zones.

→

Predictive Maintenance

Runtime monitoring and pre-alarm alerts before equipment failures occur.

→

Multi-Property Benchmarking

Compare performance across your entire portfolio from a single dashboard.

→

Utility Invoice Verification

kWh, maximum demand, and cooling costs tracked and reconciled automatically.

→

Wireless Expansion

Extend coverage to any area of the building with no additional cabling required.

Track Record

A Decade of Deployments.
Three Continents.

We've been deploying BMS and EMS systems in hotels, commercial buildings, and industrial facilities for more than a decade. That experience is embedded in every engagement.

10+
Years Operating
3
Continents
Any
Protocol Supported
FAQ

Questions.
Answered.

Straightforward answers before you pick up the phone.


Contact Us

Yes. We are completely vendor-independent and work with any manufacturer's equipment — Siemens, Honeywell, Johnson Controls, Trend, and others. We also connect to legacy systems that other integrators won't touch, using our own proprietary hardware modules where standard solutions don't exist.

Nothing changes operationally. We connect to your existing BMS via your current network — no rip-and-replace, and minimal disruption to building operations. Work is mostly back-of-house, and the building stays fully operational. Your existing system continues to function exactly as before, while we add an intelligence layer on top.

Where we identify significant energy savings potential, we fund and install the full EMS at our expense. After commissioning, we run an on/off energy test over several days, so weather and occupancy changes don't distort the result. Once savings of at least 10% on addressable energy spend are verified and you sign off, the service agreement starts and invoicing begins. Our fee is a share of the savings generated — so we only make money when you save money. Available for qualifying properties, subject to site qualification and rollout availability.

Vantage is our proprietary BMS and energy management dashboard. It provides real-time equipment visibility from any web browser, bi-directional control, automated alarms, temperature trend analysis, and multi-property performance benchmarking. It is included at no extra cost in every managed engagement.

Our primary focus is hotels and large commercial buildings where complex HVAC, chiller plant, and energy infrastructure presents the greatest opportunity. We have deployed in hotels, resorts, office towers, and industrial facilities across three continents. If your building has significant energy complexity, we're likely a fit.

Yes. Our Zigbee mesh wireless capability means the system can be extended to any area of a building without laying additional control cabling. We can connect to any device, sensor, or machine — on-premises, hybrid, edge, or cloud.

We do. Every engagement includes ongoing managed service support. We monitor the system, respond to alarms, and handle all technical matters. This is not a product we sell and walk away from.

Get Started

Let's Talk About Your Building.

Request a discovery call and we'll assess your building's systems, identify the right solution, and give you an honest view of what's possible — commercial model included.

No obligation  ·  We're not the right fit if we can't find real savings or operational pain  ·  We'll tell you honestly